地震预报的新途径--加卸载响应比理论

从力学角度看,地震的孕育过程实质上是孕震区介质的损伤演化过程,这个过程主要是一个力学过程．但解决与地震预测有关的力学问题与工程中的力学问题有许多不同之处．通常力学问题的解决需要知道其本构关系、边界条件、初始条件以及某些力学量的变化历史(如流变)．但是在地震孕育过程中它们却是未知的或不完全知道的．人们知道的只是地壳中某些物理量的变化．由此提出了加卸载响应比作为一种地震预测的新途径,并简述了加卸载响应比的基本概念、实际应用及一些最新结果．     

钢轴心受压构件截面的直接计算法

根据钢结构设计原理，依据现行国家标准《钢结构设计规范》（ＧＢＪ１７ ８８），通过计算构件合适长细比λ，直接进行钢轴心受压构件截面尺寸设计．     

土-结构相互作用体系合成模态阻尼比的振动台模型试验研究

本文籍振动台模型试验。研究了SSI体系的合成模态阻尼比问题。文中首先阐明了在SSI体系直接动力分析中应采用合成模态阻尼比的观点。研究了合成模态阻尼纟的实测确定方法。并在不同工况下，通过对模型不同部位测点的传递函数，基本频率，基本合成模态阻尼比等实测数据考虑，验证了SSI体系合成模态的存在性，合成模态阻尼比与相同应变下不考虑相互作用的单纯地基土体或刚性地基结构阻尼比的差异性及其在递增动力作用下的变化规律。     

侧柱对串列双柱脉动压力的干扰

研究了串列双圆柱旁加上一个等直径的圆柱，组成一个等边三角形排列的三圆柱的脉动压力分布．着重研究侧柱对串列双圆柱脉动压力分布的影响．研究的结果表明，绕流等边三角形排列的三圆柱，受影响最严重的是后柱．脉动压力分布出现了严重的不对称，外侧的压力脉动极其强烈，内侧的压力脉动较弱，与时均压力分布，很好的对应关系．另外，侧柱对于串列双圆柱是否达到超过临界间距的绕流流态，有很大的影响     

拉压性能不同材料厚壁圆筒和厚壁球壳的极限压力分析

本文用广义双剪应力强度理论对拉压性能不同的材料制成的厚壁圆筒和厚壁球壳进行了弹塑性应力分析，得出与拉压比有关的弹性极限内压力、塑性极限内压力、弹塑性区的应力以及弹塑性内压力与弹塑性半径之间的关系式．     

An investigation of meterial properties of non-homogeneous cylindrically orthotropic circular plates

It has been been reported that the reduced stiffness of non-homogeneous cylindricallyorthotrpic circular plate varing exponentially with radius r is obtained by using thebending theory of a simple beamThe aim of this paper is to verify the effect of radius on the materal properties According to the flat stress-strain relation the values of material properties E_r E_a and v_θr which are the functions of radius r are obtained.Compared with the experimentalvalues the analytical values of the material properties are in essential agreement withtem.     

Elastoplastic deformations of rotating parabolic solid disks using Tresca''s yield criterion

Analytical solutions for the stress distribution in rotating parabolic solid disks are obtained. The analysis is based on Tresca's yield criterion, its associated flow rule and linear strain hardening. It is shown that, the deformation behavior of the convex parabolic disk is similar to that of the uniform thickness disk, but in the case of concave parabolic solid disk, it is different. In the latter, the plastic core consists of three different plastic regions with different mathematical forms of the yield criteria. Accordingly, three different stages of elastic–plastic deformation occur. All these stages of elastic–plastic deformation are studied in detail. It is also shown mathematically that in the limiting case the parabolic disk solution reduces to the solution of rotating uniform thickness solid disk.     

On a Discrete Fourier Series Solution to Static Problem for Conical Shells of Circumferentially Varying Thickness

An approach is developed to solve the two-dimensional boundary-value problems of the stress-strain state of conical shells with circumferentially varying thickness. The approach employs discrete Fourier series to separate variables and make the problem one-dimensional. The one-dimensional boundary-value problem is solved by the stable discrete-orthogonalization method. The results obtained are presented as plots and tables __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 9, pp. 26–37, September 2005.     

宽板塑性弯曲成形过程中的板厚变化规律

根据宽板弯曲过程中的变形与应力分布特征，提出了一种计算弯曲过程中板料厚度随弯曲程度变化的新的近似解答方法．该方法基于塑性增量理论，应用塑性成形过程的体积不变假设和弯曲过程的平面假设．作为算例，得到了理想刚塑性材料的板料厚度、变薄系数以及应变中性层内移系数随板料弯曲内表面曲率半径变化的规律，并与实验数据进行了比较，两吻合良好．